Abstract Zinc-manganese alloys containing up to 40 at. % Mn were successfuly electrodeposited from a solution made of Zn and Mn chlorides, and boric acid. Cyclic voltammetry and chronoamperometry were used to clarify the influence of Mn salt concentration in the solution and deposition current density, on the kinetics of Zn-Mn electroreduction. Energy dispersive X-ray spectrometry was used to investigate a chemical composition of Zn-Mn deposits, and scanning electron microscopy was used for surface morphology analysis. It has been shown that the coatings possessing the highest Mn content, are with the surface morphology of high quality, and may be an adequate improvement of pure Zn coatings as sacrificial coatings on steel.
Bučko, M., Bajat, J., & Jokić, B. (2012). ELECTRODEPOSITION OF HIGH-MN ZINC-MANGANESE ALLOYS FROM CHLORIDE EECTROLYTE. The International Conference on Chemical and Environmental Engineering, 6(6th International Conference on Chemical & Environmental Engineering), 1-14. doi: 10.21608/iccee.2012.35833
MLA
M. Bučko; J. B. Bajat; B. Jokić. "ELECTRODEPOSITION OF HIGH-MN ZINC-MANGANESE ALLOYS FROM CHLORIDE EECTROLYTE". The International Conference on Chemical and Environmental Engineering, 6, 6th International Conference on Chemical & Environmental Engineering, 2012, 1-14. doi: 10.21608/iccee.2012.35833
HARVARD
Bučko, M., Bajat, J., Jokić, B. (2012). 'ELECTRODEPOSITION OF HIGH-MN ZINC-MANGANESE ALLOYS FROM CHLORIDE EECTROLYTE', The International Conference on Chemical and Environmental Engineering, 6(6th International Conference on Chemical & Environmental Engineering), pp. 1-14. doi: 10.21608/iccee.2012.35833
VANCOUVER
Bučko, M., Bajat, J., Jokić, B. ELECTRODEPOSITION OF HIGH-MN ZINC-MANGANESE ALLOYS FROM CHLORIDE EECTROLYTE. The International Conference on Chemical and Environmental Engineering, 2012; 6(6th International Conference on Chemical & Environmental Engineering): 1-14. doi: 10.21608/iccee.2012.35833
)
View on SCiNiTO